MasterTig 235ACDC, 325DC, 335ACDC
Operating manual - EN
For welding process and control panel feature descriptions, refer to "Welding processes and features" on page67.
Control panel parameter adjustment:
• "Home" below
• "Start & stop sequence" on page30
• "Settings" on page32 .
3.2.1 Home
'Home' is the control panel work mode after the initial machine and control panel start-up. When Home is selected,
the welding current can be adjusted by turning the control knob.
To adjust welding current:
1. Press the Home button (11).
2. Turn the control knob (1)to adjust the current. Current (A) is shown on the display.
© Kemppi
29/77 1920900 / 1939
To Next Page
Loading...
Need help?
General
