Presser Foot Types
° Zigzag foot (Foot A)
Use this foot for both straight and zigzag stitching,.
S
. Straight stitch foot (Foot H)
Use this foot for exclusively for straight stitching with
center needle position.
f
J
o Automatic buttonhole foot (Foot R)
Use this foot for one step automatic buttonhole sewing..
Simply set a button on the guide of this foot and depress
the foot control. You can sew exactly the same length of
buttonhole as the button,
• Zipper foot (Foot E)
This foot can be set to sew on each side of the zipper.
The edge of the foot guides the zipper and keeps the
seam straight.
f
J
=Overedge foot (Foot C)
This foot is specially constructed for stitching and/or
overcasting seams_ The small brush and wire guides help
control the fabric, hold the raw edge in place and keep it
from puckering, especially when sewing on knit fabrics
J
oSatin stitch foot (Foot F)
Use this foot for satin stitch and outlining applique,
° Blind hem stitch foot (Foot G)
Use this foot for perfect blind hemming and topstitching,
The foot has ridges on the bottom to keep the fabric from
slipping and a screw on top to guide the folded edge of
your hem.
f
10
To Next Page
Loading...
Need help?
General
