To Next Page
C
Courtney HardinJul 27, 2025
Why is there only a small amount of solution reaching the brush on my KENT Floor Machine, or no solution at all?
- CcatherinehollandJul 27, 2025
There might be several reasons why the KENT Floor Machine isn't dispensing enough solution: * The solution filter could be clogged or dirty, requiring cleaning. * The solution tap might be stuck closed, necessitating replacement. * The solenoid valve may be broken, or the electrical connection could be faulty, in which case you should replace the solenoid valve or repair the electrical connection. * Debris in the solution tank might be blocking the output hole, so clean the tank. * The solution hoses might be clogged with debris, requiring cleaning.
General
