Bluetooth Control
44
Register from the Bluetooth
unit
It is necessary to register the Bluetooth audio
player or cell-phone to this unit before using
the Bluetooth function.
You can register up to 10 Bluetooth units.
NOTE
• Up to 10 Bluetooth units can be registered. If an
attempt is made to register the 11th Bluetooth
unit, the Bluetooth unit connected on the earliest
date will be deleted to register the 11th one.
• This unit is compatible with the Apple Easy
Pairing function. When an iPod touch or iPhone is
connected to this unit, an authentication dialog
appears. Performing operation for authentication
on this unit or iOS smartphone registers the
smartphone as a Bluetooth device.
Follow the step 1, 2 and 3 for registration.
Step 1: Registration from the Bluetooth
device
1
Search the unit (“DDX****”/ “DMX****”)
from your smartphone/cell-phone.
2
Input the PIN code in your smartphone/
cell-phone.
PIN code is set to “0000” as the default.
● SSP (Secure Simple Pairing of Bluetooth
2.1 or later)
1
Search the unit (“DDX****”/ “DMX****”)
from your smartphone/cell-phone.
2
Confirm the request both on the
smartphone/cell-phone and the unit.
Step 2: Connection settings
• When the HFP profile is supported, Hands Free
1 or 2 is automatically selected for connection,
proceeding to the next step.
• When the A2DP or SPP profile is supported,
the cell-phone or audio player is automatically
connected, proceeding to the next step.
If cell-phones and/or audio players have already
been connected, a selection screen appears.
1
Select the hands-free number to connect.
A name of a smartphone is displayed when
it has hands-free connection with the unit.
2
Select if you want to use the audio player
app in your smartphone over A2DP, and
the other apps in your smartphone over
SPP.
This message appears if the device
supports BT audio (A2DP) or smartphone
link (SPP).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
