Kenwood R-SE9T User Manual

R-SE9T/ DP-SE9/ X-SE9 (En)
18
Preparation sectionBasic sectionApplication sectionKnow ledge sections
Hearing sound
Muting the sound temporarily
Hearing sound
1. Sw itching the pow er ON (OFF).
÷ The entire system can be sw itched
ON and OFF. The on/standby
key on the remote control has the
same function.
÷ The display part becomes dark
when the power is switched OFF.
(DIMMER function)
3. Volume adjustment.
Press the “on/standby” key of
the receiver.
2. Selecting the desired output.
When the “on/ standby” key is
pressed while the pow er is ON,
the power will be switched
OFF.
Listening through
headphones
Bass compensation
Basic use
÷ When CD, TAPE or M D is selected,
playback will start when a disc or a
tape already has been inserted.
1 TUNER §
2 CD )
3 TAPE ™
4 MD
5 AUX
on/standby
11
multi control
22
5
up
∞
down
volume
control
33
For MD, refer to the instruction
manual for the M D recorder (DM-
SE9).
÷ Quick turning produces a larger
change amount. (Dynamic rotary
volume control function)
÷ The display shows a reference
value.
11
22
33
Turn the “multi control” knob
Downloaded from: http://www.usersmanualguide.com/

Kenwood R-SE9T Specifications

General

Brand	Kenwood
Model	R-SE9T
Category	Amplifier
Language	English