Kenwood R-SE9T User Manual

R-SE9/ DP-SE9/ X-SE9 (En)
43
Preparation section Basic section Application section Know ledge sections
Compensating for the bass and treble tones
Be sure to turn EX.BASS off before this adjustment.
1SELECTOR
2TUNING
3BASS
4TREBLE
mode
mode
EX. BASS
Turn EX.BASS on.
Lights.
EX. BASS
Displayed for 5 sec.
multi control
To adjust the multi control
TUNING
2Perform the same operation as step 3 in
“During tuner reception”.
Enter the BASS mode or TREBLE
mode.
1 Each press switches the display.
÷ Turning EX.BASS on switches off the N.B. (Natural Bass)
boosting automatically.
÷ Turning EX.BASS on replaces the levels set using the multi
control with the level preset with the EX.BASS function.
÷ Turning EX.BASS off recalls the bass and treble levels set
with the multi control.
÷ Pressing the switch in the EX.BASS mode returns to the
normal mode and the EX.BASS indicator goes off.
÷ Both BASS and TREBLE can be adjusted in the range
between -10 and +10.
BASS + 1)
÷The BASS level set by the multi control is applied to the
current N.B. (Natural Bass) boosting to enhance it further.
To compensate using the EX.BASS function
Compensation by adjusting the bass and treble levels
Use the multi control knob. ...
The levels of the bass and treble tones can be set independently.
Compensation by applying the preset compensation levels
Use the EX. BASS function. ...
The levels of the bass and treble tones are enhanced by the preset levels.
The bass level enhancement is effective in listening at a low
volume. The treble level is enhanced to a predetermined level
regardless of the current volume setting.
2 Press the MODE key while “TUNING” is dis-
played.
To enter BASS adjustment mode: Display “BASS”.
To enter TREBLE adjustment mode: Display “TREBLE”.
3 While “BASS” or “TREB” is displayed, turn
the multi control to set to the desired level.
During tuner reception
During playback of a CD, etc.
(in other modes than TUNER mode)
1 Press the MODE key repeatedly.
Displayed for 5 sec.
R-SE9T
R-SE9T
Downloaded from:
http://www.usersmanualguide.com/

Kenwood R-SE9T Specifications

General

Brand	Kenwood
Model	R-SE9T
Category	Amplifier
Language	English