Kenwood R-SE9T User Manual

R-SE9T/ DP-SE9/ X-SE9 (En)
31
Preparation section Basic section Application section Know ledge sections
Playback of CD
Start playback.
Enter track Nos. in the order you w ant to play them.
Light the “PGM ” indicator.
If it is in play mode
Playback of CD
Select the “CD” input.
÷ Tracks will be played in the order they were programmed
(in order of P Nos.).
÷ When the 4 or the ¢ key is pressed during play, the
program will jump to the preceding or the following track
respectively.
÷ When the 4 key is pressed once during playback, the
play position returns to the beginning of the current track
being played.
1
Check that the CD player is in the stop mode.
2
3
4
1 Select the track.
2 Confirmation.
3 Repeat steps 1 and 2 .
÷ Up to 32 tracks can be programmed. When “FULL” is
displayed, no more tracks can be programmed.
÷ When an error has been made, press the CLEAR key and
select again.
Lights
Blinks
Listening in the desired sequence
(program playback)
Any tracks on the discs in the tray can be lis-
tened to in the desired sequence. (Max. 32 tracks)
DP-SE9
DP-SE9
DP-SE9
DP-SE9
Within 8 seconds!
7
P.M ODE
12 3
45 6
78 9
0
PTY SEARCH
+10
P.M ODE
CD
3/ 8
12345
678910
11
01 0
:
00
TRACK NO.
TRACK NO.
PGM
01 
PGM
12345
678910
11
02 P- 02
TRACK NO.
PGM
2
02 -4
:
45
TRACK NO. TOTAL
Downloaded from: http://www.usersmanualguide.com/

Kenwood R-SE9T Specifications

General

Brand	Kenwood
Model	R-SE9T
Category	Amplifier
Language	English