R-SE9T/ DP-SE9/ X-SE9 (En)
7
Preparation section Basic section Application section Know ledge sections
Before applying pow er
¶ Easy Operation
When the High grade Micro component series is connected to the system control, input switching with the
input selector (TAPE, TUNER, CD, MD) of the R-SE9T will start playback by the selected unit. Reversely, when
playback is started from a unit, the input will be switched automatically to this unit.
Accessories
Time edit recording: Recording so that no track is interrupted within the specified time.
One-touch edit recording: When listening to a CD, either a single track or the entire CD can be recorded on tape
by one-touch operation.
¶
Convenient Edit Recording fl
Unpacking
Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.
Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immedi-
ately. If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or
company receiving the unit) can file a claim against the carrier for shipping damage.
We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.
The wake-up timer and the sleep timer can be set easily.
A daily program timer also can be reserved.
¶
Simple Timer Operation t
Accessories using w ith R-SE9T
AM loop antenna (1)
Loop antenna stand (1)
FM indoor antenna (1)
Remote control unit (1)
Batteries (R6/AA) (2)
Accessories using w ith DP-SE9
Audio cord (1)
System control cord (1)
Accessories supplied w ith X-SE9
Audio cord (2)
System control cord (1)
Special features
The RDS data included in FM broadcasts can be used to search for the intended broadcasting contents and for
automatic reception from standby.
¶ R.D.S. (Radio Data System) ·
7 Amplifier unit that accomplishes high grade sound quality and low distortion
¶ CD TEXT compatibility
Disc title and track names recorded on the CD appear in the display of the MD player (DM-SE9: sold separately).
7 CD player unit that accomplishes improved sound quality and stability
¶ New ly developed D.R.I.V.E. IC installed
A D.R.I.V.E. (Dynamic Resolution Incentive Vector Enhancement) IC that rapidly improves distortion at minute
levels is installed in the CD player in order to extract the maximum performance possible from the CD.
7 Convenient easy to use operation
¶ New “TRAITRA” transistor
The newly developed “ TRAITRA” transistor with extremely superior temperature characteristics is used in this
amplifier’s amplification circuit. Through the use of this transistor, distortion generated because of temperature
change is kept to a minimum resulting in “ pure” sound reproduction.
¶ Adoption of a 24 bit new D/A convertor
Through adoption of a 24 bit internally operated high performance New D/A convertor, a smoother sound is
reproduced.
Downloaded from:
http://www.usersmanualguide.com/
To Next Page
Loading...
Need help?
General
