R-SE9T/ DP-SE9/ X-SE9 (En)
44
Preparation sectionBasic sectionApplication sectionKnow ledge sections
Enter the minute.
Enter the hour.
Activate the clock adjustment mode.
Clock adjustment
This unit incorporates a clock function. Be sure
to adjust the correct time before using the timer
function.
1
1
÷ The time of the day is represented in 12-hour AM/PM
method.
÷ Press the “enter” key. The hour is entered and the
minute display starts to blink.
2
2
Ensure that the power is OFF.
1
2
3
Example: Adjustment to 8:45
÷ The time display starts to blink.
÷ If you make a mistake, restart from the beginning.
÷ To adjust correct time, press the “enter” key at the same
moment as a time announcement.
÷ The time display blinks after a power failure or when the
power cord has been unplugged from the AC outlet and
plugged again. In such a case, adjust the clock again.
To decrease
the figure
To increase
the figure
To decrease
the figure
To increase
the figure
R-SE9T
R-SE9T
R-SE9T
auto/mono
multi control
enter
AM 8 45:
enter
multi control
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
Need help?
General
