Kenwood R-SE9T User Manual

R-SE9T/ DP-SE9/ X-SE9 (En)
33
Preparation section Basic section Application section Know ledge sections
Playback of CD
To repeat a disc
1 Confirm that the “PGM” indicator is not lit.
2 Press the “repeat” key.
3 Start playback.
3 Start playback.
1 Follow the procedure for “Listening in the
desired sequence” to step 3 to program the
tracks to be played. ⁄
To repeat only the programmed tracks
Select the “CD” input.
Repeated playback
If the “PGM” indicator is lit, press
the P.MODE key to turn it off.
Lights
To stop repeated playback
Press the “repeat” key again.
÷ The “REPEAT” indicator goes off and the playback
following the current mode of the CD player starts.
To stop repeated playback
Confirm that this is not lit.
Desired tracks or discs can be played back re-
peatedly.
DP-SE9
DP-SE9
2 Press the “repeat” key.
DP-SE9
Press the “repeat” key again.
÷ The “REPEAT” indicator goes off and the play-
back following the current mode of the CD player
starts.
TRACK NO.
01 
PGM
REPEAT
TRACK NO.
01 
PGM
234
89
11
04 0
:
00
TRACK NO. REPEAT
repeat
6
repeat
6
Downloaded from: http://www.usersmanualguide.com/

Kenwood R-SE9T Specifications

General

Brand	Kenwood
Model	R-SE9T
Category	Amplifier
Language	English