Kenwood R-SE9T User Manual

R-SE9T/ DP-SE9/ X-SE9 (En)
24
Preparation sectionBasic sectionApplication sectionKnow ledge sections
Hearing sound
Basic section
1

¡
1

¡
DPSS
DPSS (Direct Program Search System) detects an unrecorded part of 4 seconds or more as the interval
between tracks and permits easy operation of cassette tape like a CD.
To play the next program : Press once.
To play the 4th program
after the current program : Press 4 times.
During playback of top side (while 3 is lit)
To play the next program : Press once.
To play the 4th program
after the current program : Press 4 times.
To return to the beginning
of the current program : Press once.
To play the 4th program
before the current program : Press 5 times.
During playback of reverse side (while 2 is lit)
To return to the beginning
of the current program : Press once.
To play the 4th program
before the current program : Press 5 times.
Skip search
Plays the desired music program from the beginning by skipping programs until you reach the desired
program.
Up to 16 programs can be skipped.
Listening w ith fast forw ard for unrecorded portions (dash & play)
Plays music programs repeatedly by skipping non-recorded spaces of more than 10 seconds.
÷ The operation changes in reverse mode.
1“””lit.... The two tape sides are played 8
times, after w hich playback stops.
2Goes off.. A tape side is played 8 times, after
which playback stops.
÷ When the 7 key is pressed, playback stops and the
dash & play is canceled.
Press simultaneously.
Main unit only
1

¡
Downloaded from: http://www.usersmanualguide.com/

Kenwood R-SE9T Specifications

General

Brand	Kenwood
Model	R-SE9T
Category	Amplifier
Language	English