KERN PLS - Under Floor Weighing

6.8 Under floor weighing
Using under floor weighing allows weighing of objects that because of their size of
shape cannot be placed on the pan scale.
Proceed as follows:
• Turn off balance.
• Open the closing lid at the bottom of the balance.
• Carefully and completely hook in the hook for under floor weighing.
• Place balance over an opening.
• Suspend the item to be weighed from the hook and carry out weighing.
Fig. 1: Setting up balance for under floor weighing
CAUTION
• Ensure that all suspended objects are stable enough to hold the desired items
to be weighed securely (danger of breaking).
• Never suspend loads that exceed the stated maximum load (Max)
(danger of breaking)
Always ensure that underneath the load there are no living beings or objects that
might be damaged.
!
NOTE
When the under floor weighing the opening in the bottom of the balance must be
closed (protection against dust).
!
PLS/PLJ/ALS/ALJ-BA-e-0819
51