7.6.2 Determination of a reference weight by numeric entry
Operation: Display:
Ö Turn on balance using the ON/OFF-button
0,000
Ö Press Tare-button
-- -- -- --
Ö While this display is on, keep the F-button pressed until
PErc b is displayed
PErc b
Ö Press PRINT-button
0000,0000 g
Ö Enter reference weight (e.g. 90.33 g)
Use the ON/OFF-button to select the value you want to
modify, use the F-button to increase the number value
(the respective active value is blinking)
0090,3300 g
Ö Press PRINT-button, the weight is stored as reference
(100%).
0.00 %
Ö Now place items to test onto the weighing plate, the
percentage in relation to the reference part is displayed.
70.37 %
Ö To return to weighing mode press the Tare-button
-- -- -- --
Ö While this display is on, press the F-button
Ö Press Tare-button, balance is now in weighing mode
0,000 g
PLS/PLJ/ALS/ALJ-BA-e-0819
60
To Next Page
Loading...
Need help?
General
