Standard weighing unit:
Selected weighing unit remains when appliance is disconnected from power supply.
Ö Actuate tare-key; the display shows horizontal lines; during this display actuate
the CAL-key.
Ö The first function “AUTO“ appears.
Keep F-key pressed until “St_uni“ appears
Ö Select your weighing unit by actuating the PRINT-key several times
Ö Confirm your selection with the Tare-key
Ö Disconnect balance from power supply and turn on again. Now your saved
weighing unit is displayed – even after the appliance is disconnected from power
supply again.
Notice:
Models that can be verified can only be switched from “g“ to “ct“.
PLS/PLJ/ALS/ALJ-BA-e-0819
55
To Next Page
Loading...
Need help?
General
