KERN PLS - Page 4

KERN ALJ 220-4 ALJ 160-4M ALJ 220-4M
Readability (d) 0,1 mg 0,1 mg 0,1 mg
Weighing range (Max) 220 g 160 g 220 g
Minimum load (Min) - 10 mg 10 mg
Taring range (subtractive) 220 g 160 g 220 g
Reproducibility 0,2 mg 0,2 mg 0,2 mg
Linearity ± 0,2 mg ± 0,2 mg ± 0,2 mg
Minimal piece weight for
Parts counting
> 0,5 mg > 0,5 mg > 0,5 mg
Adjustment weight internal internal internal
Verifiable no yes yes
Verification value (e)
- 1 mg 1 mg
Accuracy category
- I I
Warming up time (operating
temperature)
8 h
Reference piece numbers for parts
counting
10, 20, 50, freely selectable
Weighing Units
mg, g, ct, gn,
mom, oz, dwt
mg, g, ct
Stabilization time (typically) 4 sec.
Permissible ambient temperature + 18° C .... + 30° C
Humidity of air max. 80 % (not condensing)
Under floor weighing device Loop for under floor weighing, serial
Weighing plate mm 206 x 312 x 260
Housing (W x D x H) mm 85
Weight kg (net) 6,3
PLS/PLJ/ALS/ALJ-BA-e-0819
38