1
Safety Information for DL-EP1
• Before and while operating this product, confirm its performance and functions
operate correctly.
• Implement sufficient safety measures to prevent human and property damage
in case this product fails.
• Be aware that the product functions and performance are not warranted if the product is
used outside the range of stated specifications or is modified by the customer.
• Combining this product with other equipment requires sufficient consideration
because the proper functions and performance may not be met depending on
the environment.
• Do not use this product for the purpose of protecting a human body or a part of
the human body.
• This product is not intended for use as an explosion-proof product. Do not use
this product in hazardous locations and/or in a potentially explosive atmosphere.
• Do not expose equipment, including peripherals, to rapid temperature
changes. Equipment failure may result from condensation build up.
Equipment Environment
For safe, trouble-free operation of this product, the product must not be installed
in the following environments:
• Humid, dusty, or poorly ventilated.
• Exposed to direct sunlight or heat source.
• Exposed to corrosive or flammable gases.
• Exposed directly to vibration or shock.
• Exposed to water, oil, or chemical splashes.
• Exposed to static electricity.
General Precautions
Precautions for Use
• To avoid injury or failure, turn off the power immediately in the
following cases.
- Water or foreign matter enters the main unit.
- The case is broken, for example if it is dropped.
- Smoke or unusual smell is emitted from the product.
• Use the correct power voltage. Failure to observe may result in
injury, or failure.
• Do not disassemble or modify this product. Failure to observe
may result in injury.
Do not turn off the power while you are setting any item.
Doing this may cause loss of data settings.
346GB
To Next Page
Loading...
Need help?
General