Keyence DL-EP1 - Checking the Device Compatibility

- EtherNet/IP Compatible Network Unit DL-EP1 User’s Manual (GT2) -
3-3 Cyclic communication
3-20
3
Communicating with the GT2 Series
Compatibility check is a function executed when the scanner communicates with the
DL-EP1. This function checks if the device set with the scanner matches the DL-EP1
to prevent communicating with the wrong device. This function is executed when a
connection is opened.
When using scanners of other manufacturers
For how to use the scanners of other manufacturers, refer to the manual of each
scanner.
Checking the Device Compatibility