Keyence DL-EP1 User Manual

- EtherNet/IP Compatible Network Unit DL-EP1 User’s Manual (GT2) -
3-4 Message Communication
3-50
3
Communicating with the GT2 Series
• Responses (when successful)
• Responses (when unsuccessful)
• If a sensor amplifier that does not support key lock is connected to the
DL-EP1, the error code 09H is returned (the settings of the sensor
amplifier are not changed).
• If the device is key locked, message communication cannot switch the
bank.
Attribute ID There is no data.
-
Service Data Designates the batch lock setting.
0001H
Item Description Data Example
General status Message communication has ended normally.
00H
Service response data There is no service response data.
-
Item Description Data Example
General status A general status for the service is returned
08H
Additional status An additional status is returned.
-
Service response data There is no service response data.
-
Item Description Data Example
Point

Keyence DL-EP1 Specifications

General

Brand	Keyence
Model	DL-EP1
Category	Control Unit
Language	English