Keysight 86120D and 86122C Multi-Wavelength Meters User’s Guide 53
Getting Started 1
Move the Peak Marker
You can move the peak marker in any of the following ways:
• Click any cell in the “Peak” column of the table. The peak marker will
move to the corresponding peak wavelength in the graph.
Figure 31
• If ClickZoom is enabled, click any cell in the “Wavelength” column of
the table.The peak marker will move the corresponding peak
wavelength in the graph, and the graph will zoom in to that peak. To
zoom out, click the “Wavelength” cell again.
To Next Page
Loading...
