Keysight Technologies 86120D - Setting up the Mul Ti-Wavelength Meter; Step 1. Inspect the Shipment

14 Keysight 86120D and 86122C Multi-Wavelength Meters User’s Guide
1 Getting Started
Setting Up the Multi-Wavelength Meter
This section describes the steps required to properly set up your
instrument.
Step 1. Inspect the Shipment
1 Use proper lifting techniques to remove the items from the shipping
container.
2 Inspect the shipment
Figure 1
• Inspect the shipping container for damage.
• Inspect the instrument.
NOTE
Keep the shipping container and cushioning material until you have
inspected the contents of the shipment for completeness and have
inspected the instrument.