Keysight Technologies 86120D - The Utilities Menu; The Apps Menu; The Help Menu

104 pages

Save Page as PDF

To Next Page

To Previous Page

Keysight 86120D and 86122C Multi-Wavelength Meters User’s Guide 79

Using the 86122C 2

The Utilities menu

Figure 48

The Apps menu

Figure 49

The Help menu

Figure 50

Main Page

Default Chapter3
- Table of Contents3
General Safety Considerations8
- Warnings and Notices8
- Instrument Markings9
Setting up the Mul Ti-Wavelength Meter14
- Step 1. Inspect the Shipment14
- Step 2. Consider Environmental Specifications17
- Step 3. Configure for Bench Top or Rack Mount Use19
- Step 4. Connect a Keyboard and Mouse (Optional)21
- Step 5. Connect the Line Cord22
- Step 6. Turn on the Line Power23
- Step 7. Calibrate the Touch Screen (Optional)25
- Step 8. Set the Time and Date27
- Step 9. Set the System Standby Mode28
- Step 10. Add a Printer30
- Step 11. Change Region and Language Settings33
- Step 12. Avoid Costly Repairs38
- Step 13. for more Information38
Making Measurements39
- Step 1. Consider Measurement Limitations39
- Step 2. Select Basic Measurement Setup Parameters42
- Step 3. Define Laser-Line Peaks45
- Step 4. Make Measurements48
- Step 5. Adjust the Graph to Your Preference51
- Step 6. Save Measurement Results56
Returning the Instrument for Service59
- Preparing the Instrument for Shipping59
Keysight Technologies Service Offices62
2 Using the Multi-Wavelength Meter63
Introduction64
Models65
Differences between the 86120D, 86122C and Previous Models65
- Differences in General Operation65
- Differences in Remote Commands66
Front and Rear Panel Features68
Main Screen Layout70
Graphs and Tables72
Front Panel Buttons73
Menus76
- The File Menu76
- The View Menu77
- The Setup Menu78
- The Measure Menu78
- The Utilities Menu79
- The Apps Menu79
- The Help Menu79
Dialog Box Operation80
Hard Drive Recovery81
Cleaning Instructions84
- Safety Precautions84
- Why Is It Important to Clean Optical Devices84
- What Do I Need for Proper Cleaning85
- Preserving Connectors90
- How to Clean Connector Interfaces92
- How to Clean Bare Fiber Adapters93
- How to Clean Instruments with a Fixed Connector Interface94
- Additional Cleaning Information95
- Other Cleaning Hints95
Definitions of Terms98
Specifications100
Compliance with German Noise Requirements103
Compliance with Canad Ian EMC Requirements103
Declaration of Conformity103

Keysight Technologies 86120D - The Utilities Menu; The Apps Menu; The Help Menu

Table of Contents

Related product manuals