Keysight E4416A/E4417A Power Meters Service Guide 11
3. Surround the power meter with at least 3 to 4 inches of packing material, or
enough to prevent the power meter from moving in the carton. If packing foam
is not available, the best alternative is SD-240 Air Cap
TM
from Sealed Air
Corporation (Commerce, CA 90001). Air Cap looks like a plastic sheet covered
with 1-1/4 inch air filled bubbles. Use the pink Air Cap to reduce static
electricity. Wrap the power meter several times in the material to both protect
the power meter and prevent it from moving in the carton.
4. Seal the shipping container securely with strong nylon adhesive tape.
5. Mark the shipping container "FRAGILE, HANDLE WITH CARE" to ensure careful
handling.
6. Retain copies of all shipping papers.
To Next Page
Loading...
Need help?
General
