Keysight Technologies E4417A User Manual

Replaceable Parts 5
Keysight E4416A/E4417A Power Meters Service Guide 113
Removing the A5 Daughter or A6 Measurement Assemblies
1 Disconnect the flex circuit from measurement assembly.
2 Loosen release tabs on measurement assembly and then remove vibration
support bracket.
3 Slide out the measurement assembly from the side of the power meter.
4 The daughter assembly is removed vertically.
NOTE
Take care when disconnecting the flex circuit from the measurement assembly.
A6
A5

Keysight Technologies E4417A Specifications

General

Brand	Keysight Technologies
Model	E4417A
Category	Measuring Instruments
Language	English