Keysight E5061B Network Analyzers 109
Post-Repair Procedures
Post-Repair Procedures
LCD Not adjustment needed Inspect the Booting Process
“To Check the LCD” on page 43
Touch panel (for
Opt. 016)
Calibration of the Touch Screen Inspect the Booting Process
“To Check the Touch Panel” on
page 42
Inverter Board No adjustment needed Inspect the Booting Process
Table 5-2 Post-Repair Procedures
Replaced
Assembly or Part
Required Adjustments
Correction Constants (CC)
Verification
To Next Page
Loading...
