Continuous mode 93
Step 1– Configure the sequence properties 93
Step 2 – Run the input sequence 94
Pulse mode 96
Step 1– Configure the sequence properties 96
Step 2 – Run the input sequence 97
Toggle mode 99
Step 1– Configure the sequence properties 99
Step 2 – Run the input sequence 100
Using the Data Logger Function 101
Logging data 101
Step 1 — Set the load operating mode to CC 101
Step 2 – Program the input current values 101
Step 3 – Program the sequence for the input channels 101
Step 4 – Configure the data logger traces 102
Step 5 – Configure the data logger properties 102
Step 6 – Configure and enable the DUT output accordingly 103
Step 7 – Turn on Input 1, start the sequencing and log the data 103
Step 8 – Export the data 103
Data logger view 105
Data logger marker view 106
Using the knob in data logger view 107
Data logger properties and waveform settings 108
Save the data log 112
Using the Scope Function 115
Making measurement 115
Step 1 — Set the load operating mode to CC 115
Step 2 – Program the input current values 115
Step 3 - Configure the input turn-on sequence 115
Step 4 - Configure the Scope View traces 116
Step 5 – Configure the Scope properties: 116
Step 6 – Configure and enable the DUT output accordingly 117
Step 7 – Turn on the inputs and measure the current: 117
From the remote interface: 117
Scope View 118
Scope marker view 120
Using the knob in scope view 121
Scope properties and waveform settings 122
Scope marker properties 125
Save the scope data 125
Locking/Unlocking the Front Panel 126
Capturing a Screen 126
Utilities Menu 127
Utilities Menu - Store and Recall State 127
Store Settings 128
Recall Settings 129
Power On Setting 130
Set to Defaults 130
Utilities Menu - I/O Configuration 131
LAN Settings 131
Digital IO 132
GPIB (optional) 132
4
Keysight EL30000 Series User's Guide
To Next Page
Loading...
Need help?
General
