10 Keysight Infiniium 9000 Series Oscilloscopes User’s Guide
1 Setting Up the Oscilloscope
Safety
This product has been designed and tested in accordance with accepted industry
standards, and has been supplied in a safe condition. The documentation contains
information and warnings that must be followed by the user to ensure safe
operation and to maintain the product in a safe condition.
Safety Compliance
This product complies with the current editions of the following standards:
• CAN/CSA-C22.2 No. 61010-1-12
• UL Std. No. 61010-1 (3
rd
edition)
Acoustic Statement
This is to declare that this instrument is in conformance with the German
Regulation on Noise Declaration for Machines (Laermangabe nach der
Maschinenlaermrerordnung -3.GSGV Deutschland).
LpA < 70 dB
Operator position
Normal position per ISO 7779
General Safety Notices
This is a Safety Protection Class I Product (provided with a protective earthing
ground incorporated in the power cord). The mains plug shall only be inserted in a
socket outlet provided with a protective earth contact. Any interruption of the
protective conductor inside or outside of the product is likely to make the product
dangerous. Intentional interruption is prohibited.
If this product is not used as specified, the protection provided by the equipment
could be impaired. This product must be used in a normal condition (in which all
means for protection are intact) only.
No operator-serviceable parts inside. Refer servicing to qualified personnel. To
prevent electrical shock, do not remove covers.
To Next Page
Loading...
Need help?
General
