Keysight Technologies Infiniium 9000 Series User Manual

12 Keysight Infiniium 9000 Series Oscilloscopes User’s Guide
1 Setting Up the Oscilloscope
Inspecting Package Contents
✔ Inspect the shipping container for damage.
• Keep the shipping container or cushioning material until you have inspected
the contents of the shipment for completeness and have checked the
oscilloscope mechanically and electrically.
• If the shipping container is damaged, or the cushioning materials show signs
of stress, notify the carrier and your Keysight Technologies Sales Office.
Keep the shipping materials for the carrier’s inspection. The Keysight
Technologies Sales Office will arrange for repair or replacement at
Keysight’s option without waiting for claim settlement.
✔ Inspect the oscilloscope.
If there is mechanical damage or a defect, or if the oscilloscope does not
operate properly or does not pass performance tests, notify your Keysight
Technologies Sales Office.
✔ Verify that you received the following items in the Infiniium oscilloscope
packaging.
• Infiniium oscilloscope
• Localized power cord
• Keyboard
• Mouse
• Touch screen stylus
• Accessory pouch (mounts on rear of oscilloscope)
• Front panel cover
• N2873A 10:1 divider passive probe per scope channel
• Channel flying lead set logic probe, MSO cable, and calibration fixture (MSO
models only)
If anything is missing, contact your nearest Keysight Technologies Sales Office.
✔ Verify that you received the options and accessories you ordered and that none
were damaged.
For a complete list of options and accessories available for the 9000 Series
oscilloscopes, see the Infiniium 9000 Series Oscilloscopes Data Sheets.

Keysight Technologies Infiniium 9000 Series Specifications

General

Brand	Keysight Technologies
Model	Infiniium 9000 Series
Category	Test Equipment
Language	English