Keysight Technologies Infiniium 9000 Series User Manual

22 Keysight Infiniium 9000 Series Oscilloscopes User’s Guide
1 Setting Up the Oscilloscope
Turning On the Oscilloscope
• Press the power/standby switch in the lower left corner of the oscilloscope front
panel.
After a short initialization period, the oscilloscope display appears. The
oscilloscope is ready to use.
• You can connect and disconnect probes and cables while the oscilloscope is
turned on.
Figure 5 Turning On the oscilloscope
power/standby
switch

Keysight Technologies Infiniium 9000 Series Specifications

General

Brand	Keysight Technologies
Model	Infiniium 9000 Series
Category	Test Equipment
Language	English