EasyManua.ls Logo

Keysight Technologies Infiniium 9000 Series - Environmental Characteristics

Keysight Technologies Infiniium 9000 Series
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Setting Up the Oscilloscope 1
Keysight Infiniium 9000 Series Oscilloscopes User’s Guide 13
Environmental Characteristics
Environment Indoor use only
Ambient temperature Operating: +5 °C to +40 °C
Non-operating: –40 °C to +65 °C
Humidity Operating: up to 95% relative humidity (non-condensing) at +40 °C
Non-operating: up to 90% relative humidity at +65 °C
Altitude Operating: up to 4,000 meters (13,123 feet)
Non-operating: up to 15,300 meters (50,000 feet)
Weight 26 lbs (11.8 kg)
Dimensions 16.8 in (43 cm) wide, 12.9 in (33 cm) tall, and 9 in (23 cm) deep
Safety UL61010-1 3
rd
edition
CAN/CSA-22.2 No. 61010-1-12
Installation category II
Voltage fluctuations The mains supply voltage fluctuations are not to exceed ±10% of the nominal
supply voltage.
Pollution degree The Infiniium 9000 Series oscilloscopes may be operated in environments of
Pollution Degree 2.
Pollution degree
definitions
Pollution Degree 1: No pollution or only dry, non-conductive pollution occurs. The
pollution has no influence. Example: A clean room or climate-controlled office
environment.
Pollution Degree 2. Normally only dry non-conductive pollution occurs.
Occasionally a temporary conductivity caused by condensation may occur.
Example: General indoor environment.
Pollution Degree 3: Conductive pollution occurs, or dry, non-conductive pollution
occurs which becomes conductive due to condensation which is expected.
Example: Sheltered outdoor environment.

Related product manuals