Keysight Technologies J7201A - Page 55

Remote Operations 6
Keysight J7201A/B/C Operating and Service Manual 55
Examples
To set the step size to 4 dB:
:STEP 4
To query the set attenuation step size:
[INPut:]ATTenuation:STEPsize?
Related Commands
[INPut:]ATTenuation/INPut[:ATTenuation]
[INPut:]ATTenuation:DECRement/INPut[:ATTenuation]:DECRement
[INPut:]ATTenuation:INCRement/INPut[:ATTenuation]:INCRement
[INPut:]FREQuency?
[INPut:]ATTenuation:RELative[:STATe]/INPut[:ATTenuation]:RELative[:STATe]
Enables the relative attenuation function.
[INPut:]ATTenuation:RELative[:STATe] <bool>
Examples
To enable the relative attenuation function:
:REL 1
To disable the relative attenuation function:
:REL 0
To query the state of the relative attenuation function:
[INPut:]ATTenuation:RELative[:STATe]?
Related Commands
[INPut:]ATTenuation:REFerence/INPut[:ATTenuation]:REFerence
[INPut:]ATTenuation:RELative:LEVel/INPut[:ATTenuation]:RELative:LEVel
[INPut:]FREQuency?
Maximum n/a
Units dB
Query? Yes
Set? Yes
Set/Return Parameters Boolean Data: 0|1|OFF|ON
Minimum n/a
Maximum n/a
Units n/a