Local Operation 4
Keysight J7211A/B/C Operating and Service Manual 29
10 To stop sweeping, press Stop Sweep once.
11 Next setting option is number of sweeps. E.g. The illustration displays number of sweeps is 2.
To cycle the attenuator, click once on Sweep softkey. Now, the symbol R is highlighted which
indicates that J7211A/B/C is running.
12 You can also pause instrument’s cycling by selecting paus. Press R to continue cycling.
13 To halt the cycling, press Stop Sweep softkey once.
14 Back softkey is directing you back to the previous menu.
15 The information as of last operation remains as illustrated and saved in program set 0 (S0).
To Next Page
Loading...
Need help?
General
