Keysight Technologies N5182B MXG - To Set or Return the COM;ID Parameters to a Default State

Keysight EXG and MXG X-Series Signal Generators User’s Guide 357
Using Avionics VOR/ILS Softkeys for N5171B/72B and N5181B/82B with Option 302
Using COM/ID Softkeys
To set or return the COM/ID parameters to a default state
1. Press Aux Fctn > Avionics > VOR
2. Press COM/ID
3. Press More 1 of 2
4. Press Recall Default Settings
Selecting these softkeys returns the COM/ID parameters to a set of default
state conditions.
COM/ID Menu Parameters Default State
COM/ID Off/On Off
COM/ID Code/Type Code
COM/ID Code STS
Frequency 1.02000 kHz
Depth 10.0%