Keysight Technologies N6705C - Arb Parameter Reference; Common Parameters

Arb Parameter Reference
Common
Constant-Dwell
Exponential
Pulse
Ramp
Sine
Staircase
Step
Trapezoid
User-Defined
Arb Sequence
Common Parameters
The following properties are common to most Arb functions:
Parameter Description
Return to DC Value The parameter setting returns to the DC value thatwas in effectprior to the Arb.
Last Arb Value The parameter setting remains at the last Arb value after the Arb completes.
EditPoints Create a user-defined Arb from the present Arb property values. This lets you editspecific points in the
standard arbitrary waveform.
Continuous Check to repeat the Arb continuously.
Repeat Count The number of times the Arb repeats. Except for CD Arbs, the maximum repeat count is about 16 million.
The maximum repeat count for voltage and current CD Arbs is 256.
Close Saves and closes the Properties window.
From the remote interface:
The parameter setting returns to the DC value that was in effect prior to the Arb.
Keysight N6705C Operating and Service Guide 109
3 Using the Source Functions