SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
How to Set Up EMF Settings (Requires EMF (Option 358), GPS (Option 307), and SA
Mode (Option 233–Mixed Analyzers))
c. Press Save Cable to save your changes. See also “File Saving
Naming Options” on page 695 and then to “Alpha Numeric Editing”
on page 695.
For more information:
— See also “GNSS (GPS+) and GPS” on page 701.
Figure 9-22 Example: Editing and Adding a New X axis antenna is shown. But, the Cable
Loss table is similar.
Keysight N9938-90003 User's Guide
To Next Page
Loading...
