System Settings
Alpha Numeric Editing
—Then Preferences
—Then Preferences
— Then scroll to User Folder Persist:
— User Folder Persist (On/Off) – Defaults to the current Device and
folder location at power up. Toggle User Folder Persist On/Off when a
new Device location is selected location.
— User Folder – displays the default folder location.
— User Device – displays the default device location.
See also: “Alpha Numeric Editing” and “File Saving Naming Options”.
Alpha Numeric Editing
— Keyboard Style – Toggles through Qwerty/ABC style keyboards that the
Labeler displays. Refer to “How to use the FieldFox labeler ” on page 724.
File Saving Naming Options
— Prefix – Displays the current choice for Prefix. Choices are User, Last File
(default), or Off. Refer to Prefixes and Suffixes for Filenames in “Prefixes and
Suffixes for Filenames” on page 733.
— Auto Append – Displays the current choice for Auto Append to a filename
(Suffix). Choices are Off (default), Number, Date. Refer to “Prefixes and
Suffixes for Filenames” on page 733.
Quick Save Editing
Enables/disables the Quick Save feature. Quick Save saves any files you have
set to On in the Group Save File Types preferences. Refer to “Group Save File
Types Editing” on page 696.
To save the User Device storage location, refer to Chapter 31, “File
Management.”
1. Press System 7 > Preferences > Preferences then
2. Press Next Page
until Quick Save is displayed.
IMPORTANT!
To avoid losing data, before using the Quick Save feature, verify that you
have all of the correct data file types enabled for saving.
Keysight N9938-90003 User's Guide
To Next Page
Loading...
