119
Keysight Handheld Analyzers
N99xxA User’s Guide
7 SA (Spectrum Analyzer) Mode (Option 233–Mixed
Analyzers)
SA Mode measures signals at the SA RF IN connector.
SA Mode measurements require NO calibration.
For a comprehensive SA mode tutorial, see Spectrum Analysis Basics (App
Note 150) at
https://www.keysight.com/us/en/assets/7018-06714/application-notes/595
2-0292.pdf
For information on using the FieldFox Remote Viewer which enables you to
view the FieldFox from your iOS device, refer to
https://www.keysight.com/us/en/assets/7018-04070/application-notes/599
1-2938.pdf
Figure 9-1 SA Display with Markers
To better reflect the enhancements implemented during the alignment
process, for firmware versions
>A.10.15 “IF Flatness Alignment” is now
referred to as “Channel Equalization” or “Channel Equalization Alignment”
(ChanEQ Alignment
).
To Next Page
Loading...
