System Settings
System Configuration
More GNSS Settings
—Press System 7
—Then System Configuration
—Then GNSS Selection
— Then choose from the following:
— GPS
Refer to “How to make GPS settings” on page 702.
— GLONASS
Global navigation system, operating as part of a radio
navigation-satellite system. Learn more “More GNSS and GPS
settings” on page 704.
— BDS
- China’s BeiDou navigation system. Learn more “More GNSS
and GPS settings” on page 704.
— GALILEO
- European navigation system. Learn more “More GNSS and
GPS settings” on page 704.
GNSS and GPS Freq Ref Source Settings
For convenience, the GNSS Settings menu includes the Freq Ref Source
softkey.
—Press System
> System Configuration > GNSS (GPS+) > Freq Ref Source
[GPS] then
— Choose one of the following:
— Int
, Ext, or GPS
For more, on the Freq Ref Source softkey choices, refer to “Frequency
Reference Source” on page 707.
These GNSS settings require that the A-Series FieldFox has been upgraded
with a new system board N9927-63074. Verify your system board by
pressing
System
> Service Diagnostics > System Information
then verify in the Setting column the SB Part Number is N9927-63074.
FieldFoxes with se
rial number prefixes >MY60511001 / US60510101 /
SG60517001 /SG60518501 already have this new system board installed.
Keysight N9938-90003 User's Guide
To Next Page
Loading...
