4
A.08.19 Firmware Release (CPU1) Updates (N991xA/2xA/3xA with
serial number prefixes <5607)
For customers upgrading FieldFox firmware, the following is a list of changes from the previous release:
Other updates:
— Fix to FAB USB access
A.12.3x Firmware Release (CPU2) Updates (Also, applies to:
N991xA/2xA/3xA units with serial number prefixes
≥5607
1
)
For customers upgrading FieldFox firmware, the following is a list of changes from the previous release:
— SA mode – Added:
— IQ Streaming (Option 353)
— EIRP (Effective Isotropic Radiated Power)
— Analog Demodulation Metrics
— CISPR (International Special Committee on Radio Interference) and Amplitude
Probability Distribution (APD) Support
— Mapping functionality – Added: Directional Bearing
1. Country codes have been omitted from serial number prefixes.
To Next Page
Loading...
