46 Keysight N9927-90020 User’s Guide
CAT (Cable and Antenna Test) Mode
Procedures
See Also
“Return Loss Measurements” on page 55
“1-Port Cable Loss Measurements” on page 55
“2-Port Insertion Loss Measurements” on page 57
Chapter 8, “Calibration for NA, CAT, and VVM Modes”, on page 121
“All about Markers” on page 646
“All about Limit Lines” on page 661
“All about Trace Math” on page 666
Making 75Ω (ohm) Measurements at the FieldFox Supplemental Online Help:
http://na.support.keysight.com/fieldfox/help/SupHelp/FieldFox.htm
To Next Page
Loading...
