2 Operating Information
56 Keysight 3458A Assembly-Level Repair Manual
register that holds a query response or a single reading until it is read by the
computer or replaced by new information. Use the computer's input statement to
get the response from the output buffer. For example, the following program reads
the response (3458A) and prints it.
10 ENTER 722;A$
20 PRINT A$
30 END
The same technique allows you to get readings from the multimeter. Whenever
the multimeter is making measurements and you have not enabled reading
memory (reading memory is discussed in Chapter 4), you can get a reading by
running the following program.
10 ENTER 722;A
20 PRINT A
30 END
The Local key
When you press a key on the multimeter's keyboard while operating from remote,
the multimeter does not respond. This is because the multimeter is in the remote
mode (as indicated by the display's REM annunciator) and is ignoring all but the
Local key. To return the multimeter to local mode.
Press:
To Next Page
Loading...
