Keysight DSOX3104T User Manual

130 Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide
6 Reference Waveforms
1 Display the desired reference waveform (see “To display a reference
waveform" on page 128).
2 Press the Skew softkey and turn the Entry knob to adjust the reference
waveform skew.
To display reference waveform information
1 Press the [Ref] key to turn on reference waveforms.
2 In the Reference Waveform Menu, press the Options softkey.
3 In the Reference Waveform Options Menu, press the Display Info softkey to
enable or disable reference waveform information on the oscilloscope display.
To save/recall reference waveform files to/from a USB storage
device
Analog channel, math, or reference waveforms can be saved to a reference
waveform file on a USB storage device. See “To save reference waveform files to a
USB storage device" on page 327.
You can recall a reference waveform file from a USB storage device into one of the
reference waveform locations. See “To recall reference waveform files from a USB
storage device" on page 332.

Keysight DSOX3104T Specifications

General

Brand	Keysight
Model	DSOX3104T
Category	Test Equipment
Language	English