Keysight DSOX3104T User Manual

Save/Email/Recall (Setups, Screens, Data) 20
Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide 331
You can also enter these strings by pressing the Config Email softkey and the To,
From, Server, and Subject softkeys in the Configure Email Menu.
You can specify multiple e-mail addresses by separating each address by a
semi-colon.
The Server name is the name of your mail server running the Simple Mail
Transfer Protocol (SMTP). If you do not know this name, ask your Network
Administrator.
7 Finally, press the Press to Send Email softkey.
You can also configure the [Quick Action] key to e-mail setups, screen images, or
data. See “Configuring the [Quick Action] Key" on page 357.
Recalling Setups, Masks, or Data
1 Press the [Save/Recall] key.
2 In the Save/Recall Menu, press Recall.
3 In the Recall Menu, press Recall:, then, turn the Entry knob to select the type of
file you want to recall:
• Setup (*.scp) — See “To recall setup files" on page 332.
• Mask (*.msk) — See “To recall mask files" on page 332.
• Reference Waveform data (*.h5) — See “To recall reference waveform files from
a USB storage device" on page 332.
• Arbitrary Waveform data (*.csv) — See “To recall arbitrary waveforms" on
page 333.
• CAN Symbolic data (*.dbc) — For CAN serial decode.
• LIN Symbolic data (*.ldf) — For LIN serial decode.
You can also recall setups and mask files by loading them using the File Explorer.
See “File Explorer" on page 344.
You can also configure the [Quick Action] key to recall setups, masks, or reference
waveforms. See “Configuring the [Quick Action] Key" on page 357.

Keysight DSOX3104T Specifications

General

Brand	Keysight
Model	DSOX3104T
Category	Test Equipment
Language	English