Keysight DSOX3104T - Rising Edge Count; Falling Edges Count; Mixed Measurements; Area

266 Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide
15 Measurements
This measurement is available for analog channels.
Rising Edge Count
The Rising Edge Count measurement is an edge count for the selected waveform
source.
This measurement is available for analog channels.
Falling Edges Count
The Falling Edges Count measurement is an edge count for the selected waveform
source.
This measurement is available for analog channels.
Mixed Measurements
• “Area" on page 266
Area
Area measures the area between the waveform and the ground level. Area below
the ground level is subtracted from area above the ground level.
Negative pulse count