Keysight DSOX3104T User Manual

372 Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide
23 Web Interface
Setting a Password
Whenever you connect the oscilloscope to a LAN, it is good practice to set a
password. The password prevents someone from remotely accessing the
oscilloscope via a Web browser and changing parameters. Remote users can still
view the Welcome screen, view network status, etc., but they can't operate the
instrument or change its setup without the password.
To set a password:
1 Access the oscilloscope's web interface (see “Accessing the Web Interface" on
page 360).
2 When the oscilloscope's web interface is displayed, select the Configure
Network tab from the instrument's Welcome page.
3 Click the Modify Configuration button.
4 Enter your desired password, and click Apply Changes.
Configure
Network
tab
Modify Configuration

Keysight DSOX3104T Specifications

General

Brand	Keysight
Model	DSOX3104T
Category	Test Equipment
Language	English