Keysight DSOX3104T - Print (Screens); To Print the Oscilloscopes Display

335
Keysight InfiniiVision 3000T X-Series Oscilloscopes
User's Guide
21 Print (Screens)
To print the oscilloscope's display / 335
To set up network printer connections / 337
To specify the print options / 338
To specify the palette option / 339
You can print the complete display, including the status line and softkeys, to a
USB printer or a network printer when the LAN connection is used.
The Print Configuration Menu is displayed when you press the [Print] key. The print
option softkeys and the Press to Print softkey are ghosted (not available) until a
printer is connected.
To print the oscilloscope's display
1 Connect a printer. You can:
• Connect a USB printer to one of the the USB ports on the front panel or the
rectangular USB host port on the rear panel.
For the most up-to-date listing of printers that are compatible with the
InfiniiVision oscilloscopes, please visit
www.keysight.com/find/InfiniiVision-printers.
• Set up a network printer connection. See “To set up network printer
connections" on page 337.
2 Press the [Print] key on the front panel.
3 In the Print Configuration Menu, press the Print to softkey; then, turn the Entry
knob to select the desired printer.
4 Press the Options softkey to select the print options.