Keysight E3632A - Device-Specific Commands; Table 3-8 Non-SCPI Commands

3 Remote Interface Reference 
SCPI Conformance Information
124 E3632A User’s Guide
Device-specific commands
The following commands are device- specific to your power
supply. They are not included in the 1995.0 version of the
SCPI standard. However, these commands are designed with
the SCPI standard in mind, and they follow all of the
command syntax rules defined by the standard.
Table 3 - 8 Non-SCPI commands
APPLy {<voltage>|DEF|MIN|MAX>}[,{<current>|DEF|MIN|MAX}]
APPLy?
CALibration
:COUNt?
:CURRent[:DATA] <numeric value>
:CURRent:LEVel {MIN|MID|MAX}
:CURRent:PROTection
:DAC:ERRor
:SECure:CODE <new code>
:SECure:STATe {OFF|ON},<code>
:SECure:STATe?
:STRing <quoted string>
:STRing?
:VOLTage[:DATA] <numeric value>
:VOLTage:LEVel {MIN|MID|MAX}
:VOLTage:PROTection
OUTPut
:RELay[:STATe] {OFF|ON}
:RELay[:STATE]?
SYSTem
:LOCal
:REMote
:RWLock