Getting Started 1
Introduction
E3632A User’s Guide 3
The E3632A DC power supply features a combination of
programming capabilities and linear power supply
performance that makes it ideal for power systems
applications. The power supply is programmable locally from
the front panel or remotely over the GPIB and RS- 232
interfaces. This power supply has two ranges, allowing more
voltage at a lower current. The desired output range is
selected from the front panel or over the remote interfaces.
Operational features
• Dual range of 15 V/7 A or 30 V/4 A
• Constant voltage (CV) or constant current (CC) operation
• Overvoltage protection (OVP) and overcurrent protection
(OCP)
• Three storage locations (1 to 3) for user- defined operating
states
• Automatic power- on self- test
• Remote sensing for load voltage
• User calibration from the front panel or via the remote
interfaces
Front panel operations
• Easy- to- use knob control
• Output range selection
• Enabling or disabling OVP and OCP features
• Setting the OVP and OCP trip levels
• Clearing OVP and OCP conditions
• Setting and displaying the voltage and current limit values
• Saving and recalling operating states
• Returning the power supply to local mode from remote
interface mode
• Displaying remote interface error message
• Calibrating the power supply, including changing the
calibration security code
To Next Page
Loading...
Need help?
General
