2 Operation and Features
Storing and Recalling Operating States
34 E3632A User’s Guide
To cancel the store operation, let the display time- out
after about three seconds or press any other function key
except
. The power supply returns to the normal
operating mode and to the function pressed.
4 Save the operating state.
The operating state is now stored.
DONE
This message appears on the display for approximately 1
second.
Recalling a stored state
1 Turn on the recall mode.
Memory location 1 will be displayed in the recall mode.
RECALL 1
This message appears on the display for approximately
three seconds.
2 Recall the stored operating state.
Turn the knob to the right to change the displayed
storage location to 3.
RECALL 3
If this setting is not followed within three seconds with
, the power supply returns to normal operating
mode and will not recall the instrument state 3 from
memory.
3 Restore the operating state.
DONE
This message appears on the display for approximately 1
second.