S-Series Oscilloscopes Service Guide 3
In This Service Guide
This guide provides service information for Infiniium S-Series oscilloscopes. It
covers these areas:
Chapter 1, “General Information", lists the oscilloscope models that are covered by
this guide, the supplied accessories, and the specifications and characteristics for
the Infiniium S-Series oscilloscopes.
Chapter 2, “Calibration", describes the types of calibrations, and how and when to
run the user calibration procedure.
Chapter 3, “Testing Performance", provides instructions for testing the
oscilloscope to verify that it performs according to specifications.
Chapter 4, “Troubleshooting", provides flowcharts and procedures for diagnosing
problems for assembly-level repair.
Chapter 5, “Replacing Assemblies", provides instructions for removing and
replacing assemblies in the oscilloscope.
Chapter 6, “Replaceable Parts", provides exploded parts diagrams and a list of
orderable replacement parts.
Chapter 7, “Theory of Operation", briefly describes the basic structure of the
oscilloscope and how its parts interact.
Chapter 8, “Safety Notices", provides warnings and describes icons used on the
oscilloscopes.
To Next Page
Loading...
Need help?
General
