Keysight Infiniium MSOS404A Service Guide

Replacing Assemblies 5
S-Series Oscilloscopes Service Guide 77
7 Remove the two M4 screws from the upper rear cover of the instrument.
8 Remove the two M4 screws from the bottom rear cover of the oscilloscope.
9 With the front cover installed, put the oscilloscope on its face and lift up on the
rear cover to remove it from the chassis.

Keysight Infiniium MSOS404A Specifications

General

Brand	Keysight
Model	Infiniium MSOS404A
Category	Test Equipment
Language	English